TIPS ABOUT HOW TO Extend Smok Pen Recharge Time
The Smok Pen is a new pen that was created by two guys in California. They wished to develop a cool writing instrument that appeared as if a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the market by storm.
The Smok Pen has a built quality that’s just great. I found that even though it can be an electronic pen the construction is just as good as the pens that I’ve reviewed. This is because of how they made the very best cap. You don’t need to be worried about the cap cracking or breaking on you Smok Valve Pen.
Both biggest differences that separate the Smok Valve from other pens may be the form of the coils and the way that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I think that they did this deliberately, to help make the pen feel bigger.
Invest the a look at a Smok Pen, you will notice that your body of the pen is round and not smooth like other pens. On the back of the pen there exists a little tab that houses the coil. Once you press on the tab it is simple to turn the heating element on / off. I really liked this feature because it allows me to utilize the Smok Pen 22 whenever Personally i think like smoking.
To utilize the Smok Pen you should keep the heat button pressed. After the button is pressed, the heating element will begin to warm up. Once it reaches the appropriate temperature you can switch off the heating element. Smok recommends using a 22mm tank. I prefer a more substantial tank, but that’s just me.
When you put your Smok Pen in to the tank you will see a indicator light come on. Puff Bar The indicator light will remain green unless you put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. You should always put your pen in to the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids into the coil heads.
After you have completed this step, it is best to check to see for anyone who is at the right temperature for the coils to fire. Or even then you should turn the energy off and try again. Should you be still not satisfied together with your Smok Pen then I suggest you take it set for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just do not work as they should. I suggest that you perform the following two steps, then go ahead and check the Smok Pen to see if it still has the electronic charging port.
Prior to going any further you should remove the battery from your own pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. You will find a wire that runs through the Smok’s body which is green in color. You need to loosen this wire using pliers. After you have loosened this wire you can then access the sub-ohm. You need to then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch the coils.
When you have placed the sub-ohm tank in to the pen you should then place the rest of the components like the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Turn on the power and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You should then wait approximately 30 seconds before turning it back off. When you first put the pen into the microwave the electronic reading will show a low voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.
Once the Smok Pen has reached the temperature that it requires to reach you should then connect the two wires to the negative and positive on the positive post on the Smok unit. You need to then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to underneath of the Smok’s on / off switch.
After all of the components have been placed into the pen, you should turn the energy on. Following the first test run, you should be able to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and replace it with a fresh one. For your convenience gleam green light that may be pressed to be able to confirm the battery charging status. If you have done these things and you do not start to see the green light indicating charging, you should replace the battery.